placeholderimage
placeholderimage

Hansa C60

The powerful hydraulic feed system makes it easy to process any material. Its wide feed opening (18”) means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feed rate with the control bar and the rest is automatic. The draft action of the rotor will blow the chips into any size truck or stockpile on the ground. With the 360° rotating outlet chute the discharge direction can be changed within seconds. Easy manoeuvrability is a feature of this machine, an important factor in the arboricultural industry.

If you have special requirements these can often be incorporated in the build of your machine. Options such as cone holders, rake holders and spare wheels can be manufactured to suit your operation. We will even powder coat your machine in a colour of your choice!

Features

  • Wide Infeed Opening: 254 x 457mm (10”x18”), excellent for processing foliage, brushy and forked branches
  • Vertical Anvil: Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by abrasive material.
  • Hydraulic Pump: Connected to the auxiliary drive of the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material.
  • Clutch: Easy starting with soft start technology. Simple and reliable. Auto tensioning belt drive system.
  • Pivot Outlet Chute: Outlet chute can be pivoted vertically by 260mm to suit your truck height or your desired outlet height.
  • Outlet: 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
  • Jockey Wheel: Large solid wheel, height adjustable.
  • Light System: LED tail, brake and license plate lights, suitable for 12 or 24 volt system.
  • Feed Roller: Pivot type, operates with less friction, moves forward and up to within 10mm of knives.
  • Feed Control Bar: Pull to feed, push for reverse.
  • Feed Table: Folds away and is locked when transporting the machine.
  • Auto Sensor Feed: Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feed roller jams are reversed and cleared automatically, eliminating manual reversing of feed roller if a blockage occurs.
  • Finish: Media blasted surface, zinc shielded and powder coated (Hansa green or optional colour of your choice).
  • Warranty: 12 month warranty (conditions apply).
Length (inlet table folded up)
3850mm
Width
1800mm
Height
2100mm (minimum)
Weight
1490kg (1620kg with winch)
Make & model
65HP Kohler liquid cooled
Type of fuel
Diesel
Fuel tank
65L
Hydraulic oil tank
24L
Frame description
100 x 50 x 5mm RHS
Tires
14" wheels
Disk speed
1620RPM
Disk diameter
800 x 40mm
Shaft diameter
60mm
Knives
Four
Feed opening
254 x 457 / 10" x 18"
Chipping capacity
254mm / 10"
Feed table height
700mm
Feed table length (to feed rollers)
1550mm
Infeed chute opening
960 x 650mm
Roller style
Single roller, spring mounted, 305mm / 12" diameter
Feed speed range
0 - 40m/min / 135fpm with flow control, full reverse
Discharge height
2100mm - 2360mm, adjustable
Degree of rotation
360°
Road brakes
Hydraulic disk road brakes with handbrake standard

© Copyright . All rights reserved. PRIVACY POLICY. Designed by KINGFISHER.